Sapicalculator

Home›Engineering calculators›Tile Calculator

Construction / floor and wall finishes

Tile Calculator

Calculate tile quantity, boxes and cutting allowance for floors, walls or splashbacks.

Formula basedLocal calculationSI units
▦
INPUTRESULT
FIELD NOTE / TILE

Enter your measurements

LIVE

Use the units shown beside each field. Change any value and recalculate.

Calculated result

Ready
—Surface area
—Tile count
—Order area
Tile count—
Order area—
Enter values above to create a result.

How the variables relate

The diagram is a visual reminder of the dimensions used in the calculation.

ABC

How to use this tool

  1. 1Enter the area length in the unit shown.
  2. 2Enter the area width in the unit shown.
  3. 3Enter the tile length in the unit shown.
  4. 4Review the result and check it against your project specification.

Tiles = area ÷ tile area × (1 + waste)

The calculator keeps the displayed units visible so the result can be checked without guessing what each number means.

Values are rounded for display. Keep full precision when transferring a result to a drawing or schedule.

Before you build or order

  • Rectangular layouts may use less waste than diagonal or patterned layouts.
  • Round up to complete boxes after checking the pack coverage.
  • Keep spare tiles from the same batch for future repairs.

Common questions

What does this calculator estimate?

Calculate tile quantity, boxes and cutting allowance for floors, walls or splashbacks. Results are intended for planning and checking, then should be confirmed against project drawings, supplier data or local code.

Are the calculations performed locally?

Yes. The page calculates in your browser, updates immediately, and does not require an external data service.

What should I verify before ordering?

Verify dimensions, units, tolerances, waste allowance and the specification supplied by your engineer or material manufacturer.

Common questions

What does this calculator estimate?

Calculate tile quantity, boxes and cutting allowance for floors, walls or splashbacks. Results are intended for planning and checking, then should be confirmed against project drawings, supplier data or local code.

Are the calculations performed locally?

Yes. The page calculates in your browser, updates immediately, and does not require an external data service.

What should I verify before ordering?

Verify dimensions, units, tolerances, waste allowance and the specification supplied by your engineer or material manufacturer.

Tile Calculator for real-world planning

Calculate tile quantity, boxes and cutting allowance for floors, walls or splashbacks. This page explains the inputs, the formula and the assumptions behind the result, so you can use it as a quick design check rather than a black-box number generator. It works on desktop and mobile, performs calculations locally, and keeps the measurement units next to every field.