Sapicalculator

Home›Engineering calculators›Brick Calculator

Construction / masonry planning

Brick Calculator

Estimate the number of bricks and mortar volume needed for a wall, including waste.

Formula basedLocal calculationSI units
▤
INPUTRESULT
FIELD NOTE / BRICK

Enter your measurements

LIVE

Use the units shown beside each field. Change any value and recalculate.

Calculated result

Ready
—Wall area
—Brick count
—Mortar volume
Brick count—
Mortar volume—
Enter values above to create a result.

How the variables relate

The diagram is a visual reminder of the dimensions used in the calculation.

ABC

How to use this tool

  1. 1Enter the wall length in the unit shown.
  2. 2Enter the wall height in the unit shown.
  3. 3Enter the brick length in the unit shown.
  4. 4Review the result and check it against your project specification.

Bricks = wall area ÷ brick face area × (1 + waste)

The calculator keeps the displayed units visible so the result can be checked without guessing what each number means.

Values are rounded for display. Keep full precision when transferring a result to a drawing or schedule.

Before you build or order

  • The estimate uses a 10 mm nominal mortar joint.
  • Subtract doors and windows for a tighter takeoff.
  • Buy by the supplier’s pack size and keep a small breakage allowance.

Common questions

What does this calculator estimate?

Estimate the number of bricks and mortar volume needed for a wall, including waste. Results are intended for planning and checking, then should be confirmed against project drawings, supplier data or local code.

Are the calculations performed locally?

Yes. The page calculates in your browser, updates immediately, and does not require an external data service.

What should I verify before ordering?

Verify dimensions, units, tolerances, waste allowance and the specification supplied by your engineer or material manufacturer.

Common questions

What does this calculator estimate?

Estimate the number of bricks and mortar volume needed for a wall, including waste. Results are intended for planning and checking, then should be confirmed against project drawings, supplier data or local code.

Are the calculations performed locally?

Yes. The page calculates in your browser, updates immediately, and does not require an external data service.

What should I verify before ordering?

Verify dimensions, units, tolerances, waste allowance and the specification supplied by your engineer or material manufacturer.

Brick Calculator for real-world planning

Estimate the number of bricks and mortar volume needed for a wall, including waste. This page explains the inputs, the formula and the assumptions behind the result, so you can use it as a quick design check rather than a black-box number generator. It works on desktop and mobile, performs calculations locally, and keeps the measurement units next to every field.