Sapicalculator

Home›Engineering calculators›Concrete Calculator

Construction / material planning

Concrete Calculator

Estimate concrete volume and the amount of cement, sand and aggregate for a pour.

Formula basedLocal calculationSI units
▦
INPUTRESULT
FIELD NOTE / CONCRETE

Enter your measurements

LIVE

Use the units shown beside each field. Change any value and recalculate.

Calculated result

Ready
—Concrete volume
—Cement estimate
—Aggregate estimate
Cement estimate—
Aggregate estimate—
Enter values above to create a result.

How the variables relate

The diagram is a visual reminder of the dimensions used in the calculation.

ABC

How to use this tool

  1. 1Enter the slab length in the unit shown.
  2. 2Enter the slab width in the unit shown.
  3. 3Enter the slab depth in the unit shown.
  4. 4Review the result and check it against your project specification.

Concrete volume = length × width × depth × (1 + waste)

The calculator keeps the displayed units visible so the result can be checked without guessing what each number means.

Values are rounded for display. Keep full precision when transferring a result to a drawing or schedule.

Before you build or order

  • The material split is an estimate based on a nominal 1:2:3 cement:sand:aggregate mix by volume.
  • Always confirm the mix design with the project engineer or supplier.
  • Order a small allowance for uneven subgrade and handling loss.

Common questions

What does this calculator estimate?

Estimate concrete volume and the amount of cement, sand and aggregate for a pour. Results are intended for planning and checking, then should be confirmed against project drawings, supplier data or local code.

Are the calculations performed locally?

Yes. The page calculates in your browser, updates immediately, and does not require an external data service.

What should I verify before ordering?

Verify dimensions, units, tolerances, waste allowance and the specification supplied by your engineer or material manufacturer.

Common questions

What does this calculator estimate?

Estimate concrete volume and the amount of cement, sand and aggregate for a pour. Results are intended for planning and checking, then should be confirmed against project drawings, supplier data or local code.

Are the calculations performed locally?

Yes. The page calculates in your browser, updates immediately, and does not require an external data service.

What should I verify before ordering?

Verify dimensions, units, tolerances, waste allowance and the specification supplied by your engineer or material manufacturer.

Concrete Calculator for real-world planning

Estimate concrete volume and the amount of cement, sand and aggregate for a pour. This page explains the inputs, the formula and the assumptions behind the result, so you can use it as a quick design check rather than a black-box number generator. It works on desktop and mobile, performs calculations locally, and keeps the measurement units next to every field.